Wafer Gripper

SLW Series

Reduce fragment rate
With vacuum release port, improve efficiency
Easy to install, different types of option
Simple structure, and integrated design, could connect to compressed air directly, with no need extra vacuum generator

Features

Thin Lip Wafer Gripper

Multihole adsorbing area, prevent the physical deformation of the fragile workpiece
Integrated with a suction cup and vacuum generator
Vertical exhaust and lateral exhaust for option
Vertical and horizontal mounting types for option

Selection Guide

SLW Series Special Vacuum Gripper

SLW 115 PK - M10 I - F1

① ② ③ ④ ⑤ ⑥

① Series	Dimension	③ Material of suction cup	④ Specification of vacuum generator	⑤ Exhaust direction	⑥ Mounting flange
SLW	100 - 100×55mm	PK - PEEK	M10 - Diameter φ10mm	I - Vertical exhaust	F1 - Vertical，55×6mm
	115 - 115×115mm	AE - Aluminum plate+	M15 - Diameter φ15mm	Y - Lateral exhaust	F3 - Horizontal，71×9mm
	146 - 146×146mm	EPDM support cushion			F9 - Vertical, Triangular flange
	170 - 170×105mm	FT - Sponge+PTFE
	120 - φ120mm
	150 - φ150mm
	180 - φ180mm

Selection

Model/ Specification of vacuum generator
M10	M15
SLW100PK-M10I-F1 SLW100PK-M10Y-F1	SLW120AE-M15I-F9 SLW120FT-M15I-F9
SLW100PK-M10I-F3 SLW100PK-M10Y-F3	-
SLW115PK-M10I-F1 SLW115PK-M10Y-F1	SLW150AE-M15I-F9 SLW150FT-M15I-F9
SLW115PK-M10I-F3 SLW115PK-M10Y-F3	-
SLW146PK-M10I-F1 SLW146PK-M10Y-F1	SLW180AE-M15I-F9 SLW180FT-M15I-F9
SLW146PK-M10I-F3 SLW146PK-M10Y-F3	-
SLW170PK-M10I-F1 SLW170PK-M10Y-F1	-
SLW170PK-M10I-F3 SLW170PK-M10Y-F3	-

Technical parameters

Mode	Air supply pressure range bar	Rated air supply pressure bar	Max. vacuum level -kPa	Max. vacuum flow NL/min	Air consumption NL/min	Working temperature ℃
SLW115-M10	1.0~7.0	5	11	400~430	150	0~60
SLW146-M10	1.0~7.0	5	11	410~440	150	0~60
SLW100-M10	1.0~7.0	5	11	330~460	150	0~60
SLW170-M10	1.0~7.0	5	11	350~490	150	0~60
SLW120-M15	1.0~7.0	5	4.5	370~460	150	0~60
SLW150-M15	1.0~7.0	5	4.5	370~460	160	0~60
SLW180-M15	1.0~7.0	5	4.5	370~460	180	0~60

Specific

Thin Lip Wafer Gripper

Features  